V8043E1020/U Honeywell 1" Sweat Zone Valve Normally Closed With End Switch & Leads
Part #HONV8043E1020
MFG #V8043E1020/U
Manufacturer Name : Honeywell
- Zone Valve
- Type 2-Way
- Applicable Standard UL
- Nominal Size 1"
- End Connection Soldered x Soldered
- Actuation Type Spring Return
- Valve Position Normally Closed
- Body Material Brass
- Valve Timing 15 Second Normally Open
- Input Supply Rating 7.7 VA at 24 Volt AC 50/60 Hertz 0.32 Amp
- Temperature Rating 50 to 200 Deg F Fluid
- Pressure Rating 20 PSI Close Off, 125 PSI Static
- Inclusions/Features Easy Installation, Manual Opener for Valve Operation, End Switch Enclosure
- Application Hydronic Control, Steam Control, Fan Coil Unit
- Overall Dimension 3-11/16" Width x 2-3/8" Depth x 4" Height
- Maximum Differential Pressure 20 PSI Close off
- Electrical Connection 18" Leads
- Flow Coefficient 3.5
- Seat Material Brass
- Stem Material Stainless Steel
- Ball Plug Material Buna-N Rubber Ball
- Disc Material Buna-N Rubber Ball
- Packing Material EPDM Rubber O-Ring
- End Switch Rating 50 VA Pilot Duty at 24V
- Auxiliary End Switch SPST
- Install Instructions
Specification Sheet - Two Way On/Off Low Voltage Valves Consist of an Actuator and Valve Assembly for Controlling the Flow of Hot Water; Manual Opener (On all Models, Except Straight-Through, Normally Open Valves) for Valve Operation on Power Failure; Valve Returns to Automatic Position when Power is Restored; All Models may be Installed without Disassembling the Valve; Compact Construction for Easy Installation; Complete Power Head may be Removed or Replaced without Breaking Plumbing Line Connections or Draining the System; Actuator Motor may be Replaced without Removing the Valve Body or Draining the System; Choice of Sweat or Flare Fitting Brass End Connections for Standard Copper Tubing; Fit's Under the Cover of Most Baseboards