152-0005 Zoeller BN152 Dose-Mate High-Head Cast Iron Automatic Effluent Submersible Pump 115V 4.3 Amps 1/4 HP 3450 RPM 1PH With 1-1/2" Discharge Size And 1-1/2" Discharge End Connection And 20 Ft Power Cord
Part #ZOE1520005
MFG #152-0005
Manufacturer Name : Zoeller
- Dewatering Effluent Pump
- Type Submersible
- Applicable Standard UL, CSA (Canada and US), SSPMA
- Discharge Size 1-1/2"
- End Connection Threaded Outlet
- Overall Dimensions 10-3/32" Length x 7-3/4" Width x 12-1/8" Height
- Float Type Piggyback Variable Level
- Flow Rate 72 GPM
- Discharge Head 38'
- Casing Material Powder Coated Epoxy Finished Cast Iron
- Shaft Material AISI 1215 Steel
- Housing Material Cast Iron
- Impeller Material Thermoplastic
- Impeller Design Non-Clogging Vortex
- Shaft Seal Details Carbon-Ceramic Face Mechanical Seal
- Solid Size 3/4"
- Power Cord Length 20'
- Power Rating 4/10 HP
- Input Supply Rating 115 Volt 60 Hertz 1 Phase 8.5 Amp
- Speed Rating 3450 RPM
- Temperature Rating 130 Deg F
- Motor Type Oil Filled Hermetically Sealed, Permanent Split Capacitor
- Options Pump Stand
- Inclusions/Features Automatic Operation, Stainless Steel Lifting Handle, Bolts, Hardware, Upper Sleeve Bearing and Lower Ball Bearing Running in Bath of Oil, Neoprene Gasket, PVC Adapter Fitting, Automatic Reset Thermal Overload Protected
- Application Dewatering, Effluent System, Sump, Septic Tank, Enhanced Flow Step Systems
- Weight 39 Lb
- Install Instructions
Specification Sheet - The Sizing of Effluent Systems Normally Requires Variable Level Floats Controls and Properly Sized Basins to Achieve Required Pumping Cycles or Dosing Timers with Non Automatic Pumps