J10 Goulds 1 HP 115/230V Convertible Jet Pump
Part #GOUJ10
MFG #J10
Manufacturer Name : Goulds
- Jet Pump
- Type Back Pullout
- Applicable Standard CSA, UL 778
- Suction Size 1-1/4"
- Discharge Size 1"
- End Connection Threaded x Threaded
- Overall Dimensions 21-1/2" Length x 7" Width x 8.75" Height
- Flow Rate 3.6 to 24.8 GPM Shallow Well, 4.5 to 19.3 GPM Deep Well
- Discharge Head 5 to 25' Shallow Well, 30 to 120' Deep Well
- Shaft Material Stainless Steel
- Impeller Material Glass Filled Noryl
- Warranty 12 Month from Date of Installation, 18 Month from Date of Manufacture
- Shaft Seal Details Mechanical Seal
- Pressure Switch Type Pre Set
- Pressure Switch Setting 30 to 50 PSI
- Power Rating 1 HP
- Input Supply Rating 115/230 Volt at 60 Hertz 1 Phase
- Speed Rating 3500 RPM
- Temperature Rating 140 Deg F
- Motor Type NEMA Double Compartment Dual Voltage Capacitor Start
- Inclusions/Features Shallow Well Adapter, Nozzle, Venturi (Diffuser), Gasket, Bolt, Pipe Plug, Jet Body, Foot Valve, Check Valve
- Application Shallow/Deep Well, Home, Farm, Cottage, Booster Service
- Thermal Load Protection Automatic Reset
- Rotation Type Clockwise
- Weight 59 Lb
- Install Instructions
Specification Sheet - Convertible May be Used on Shallow or Deep Well Applications Using Appropriate Gould's Water Technology Fittings. Serviceable. Back Pull-Out Design for Service Without Disturbing Piping. Two Compartment Motor for Access to Wiring and Replaceable Components. Nozzle Clean Out Plug in Shallow Well Adapter. Corrosion Resistant, Plastic Tubing and Fittings are Easily Removed for Cleaning. Premium O-Ring Design Fittings Need Only be Hand Tight to Seal. Diffuser (Guide Vane) Bolt Down Lexan Diffuser has Stainless Wear Ring for Extended Performance in Abrasive Conditions. Powered for Continuous Operation. Pump Ratings are Within the Motor Manufacturer's Recommended Working Limits. Can be Operated Continuously Without Damage. Corrosion Resistant Electro-Coat Paint is Baked on. Protected Mechanical Seal. Diaphragm Retains Water in the Casing to Ensure the Mechanical Seal Can Never Run Dry. Excellent Air Handling Ability. After Initial Priming the Pump has the Ability to Re-Prime Itself. 12 Month from Date of Installation, 18 Month from Date of Manufacture Warranty.