267-0002 Zoeller N267 Waste-Mate Cast Iron Manual Sewage Pump 1/2 HP 115V 43.6 Amps With 2" Discharge Port Less Float Switch And 15 Ft. Power Cord
Part #ZOE2670002
MFG #267-0002
Manufacturer Name : Zoeller
- Dewatering Effluent Pump
- Type Submersible
- Applicable Standard UL 778, CSA (Canada and US), CSA C22.2, SSPMA
- Discharge Size 2"
- End Connection Threaded Outlet
- Overall Dimensions 13.06" Length x 11.218" Width x 14-5/8" Height
- Float Type 2-Pole Piggyback Variable Level Mechanical
- Flow Rate 45 to 115 GPM
- Discharge Head 5 to 15'
- Casing Material Powder Coated Epoxy Finished ASTM Class 25 Cast Iron
- Shaft Material AISI 1215 Cold Rolled Steel
- Housing Material Powder Coated Epoxy Finished ASTM Class 25 Cast Iron
- Impeller Material Plastic
- Impeller Design Non-Clogging Vortex
- Shaft Seal Details Carbon-Ceramic Face Mechanical Seal
- Solid Size 2"
- Power Cord Length 15'
- Power Rating 1/2 HP
- Input Supply Rating 115 Volt 60 Hertz 1 Phase 10.4 Amp
- Speed Rating 1725 RPM
- Temperature Rating 130 Deg F
- Motor Type Oil Filled Hermetically Sealed
- Options Cast Iron Impeller
- Inclusions/Features Non-Automatic Operation, Stainless Steel Arm, Bolt, Guard, Handle and Screw, Seal Assembly, Square Ring and Gasket, Oil Lubricated Bearing, Metal Inserts, Automatic Reset Thermal Overload Protected
- Application Dewatering, Sewage, Effluent System
- Weight 47.5 Lb
- Install Instructions
Specification Sheet - The Sizing of Effluent Systems Normally Requires Variable Level Floats Controls and Properly Sized Basins to Achieve Required Pumping Cycles or Dosing Timers with Non Automatic Pumps