295-0004 Zoeller E295 High-Head Waste-Mate Vertical Cast Iron Manual High-Head Sewage Pump With 2 HP 230V 60 Hz 17.1 Amps 3450 RPM 1PH With 2" NPT Flanged Discharge And 20 Ft. Power Cord
Part #ZOE2950004
MFG #295-0004
Manufacturer Name : Zoeller
- Sewage Pump
- Type Submersible, Vertical
- Applicable Standard CSA (Canada and US), CSA C22.2, SSPMA, UL 778
- Discharge Size 2", 3"
- End Connection Female Threaded Outlet
- Overall Dimensions 12.875" Length x 8.25" Width x 21-3/16" Height
- Float Type 2-Pole Single/Double Piggyback Variable Level Mechanical
- Flow Rate 23 to 214 GPM
- Discharge Head 5 to 70'
- Casing Material Powder Coated Epoxy Cast Iron
- Shaft Material 1117 Carbon Steel/416 Stainless Steel
- Housing Material Powder Coated Epoxy Cast Iron
- Impeller Material C89833 Bronze
- Impeller Design Non-Clogging Vortex
- Shaft Seal Details Carbon-Ceramic Face Mechanical Seal
- Solid Size 2"
- Power Cord Length 20'
- Power Rating 2 HP
- Input Supply Rating 230 Volt 60 Hertz 1 Phase 17.1 Amp
- Speed Rating 3450 RPM
- Temperature Rating 130 Deg F
- Motor Type Oil Filled Hermetically Sealed
- Inclusions/Features Non Automatic Operation, Stainless Steel Arm, Bolt, Float Rod, Guard, Handle, and Screw, Seal Assembly, Thermal Overload Protection, Upper and Lower Ball Bearing, Neoprene Cord and Plug
- Application Dewatering
- Weight 88 Lb
- Install Instructions
Specification Sheet - The Sizing of Effluent Systems Normally Requires Variable Level Float's Controls and Properly Sized Basins to Achieve Required Pumping Cycles or Dosing Timers with Non Automatic Pumps