10GS05422C Goulds 1/2 HP 230V 2 Wire 10 Gallon 4" Submersible Pump
Part #GOU10GS05422C
MFG #10GS05422C
Flow Rate : 10.00 GPM
Horsepower : 1/2 HP
Manufacturer Name : Goulds
Option : 2-Wire with Ground
Type : Pump
- Submersible Pump
- Type Seven Stage
- Applicable Standard NSF/ANSI 61G/372, UL 778, CAN 22.2, CSA (Canada and US), FDA
- Discharge Size 1-1/4"
- End Connection Threaded Outlet
- Overall Dimensions 3.75" Diameter x 11.5" Length
- Flow Rate 10 GPM
- Discharge Head 50 to 225'
- Casing Material AISI 304 Polished Stainless Steel
- Shaft Material AISI 304 Stainless Steel
- Screen Material AISI 304 Stainless Steel
- Housing Material Stainless Steel
- Impeller Material Glass Filled Noryl
- Warranty 36 Month from Date of Installation, 42 Month from Date of Manufacture
- Power Rating 0.5 HP
- Input Supply Rating 230 Volt at 60 Hertz 1 Phase
- Speed Rating 3450 RPM
- Pressure Rating 0 to 60 PSI
- Motor Type Hermetically Sealed
- Inclusions/Features 2-Wire, Centripro Motor, Check Valve, AISI 304 Stainless Steel Check Valve Poppet/Seat, Buna Check Valve Seal, Noryl Bearing Spider, Polymer Bearing, AISI 301 Stainless Steel Klipring/Bowl/Shim/Cable Guard/Suction Screen, Lexan Diffuser, Hex Shaft Design, Sand Handling Design
- Application Residential Water System
- Minimum Well Size 4"
- Coupling Material AISI 304 Stainless Steel/Powder Metal
- Weight 7 Lb
- Install Instructions
Specification Sheet - Powered for Continuous Operation. All Ratings Are Within the Working Limits of the Motor as Recommended by the Motor Manufacturer. Pump Can be Operated Continuously Without Damage to the Motor. Field Serviceable. Units have Left Hand Threads and Are Field Serviceable with Common Tools and Readily Available Repair Parts. Sand Handling Design. Our Face Clearance, Floating Impeller Stack has Proven Itself for over 50 Years as a Superior Sand Handling, Durable Pump Design. FDA Compliant Non-Metallic Parts. Impellers, Diffusers and Bearing Spiders Are Constructed of Glass Filled Engineered Composites. They Are Corrosion Resistant and Non-Toxic. Discharge Head/Check Valve. Cast 303 Stainless Steel for Strength and Durability. Two Cast-In Safety Line Loops for Installer Convenience: The Built-In Check Valve is Constructed of Stainless Steel and FDA Compliant BUNA Rubber for Abrasion Resistance and Quiet Operation. Motor Adapter. Cast 303 Stainless Steel for Rigid, Accurate Alignment of Pump and Motor. Easy Access to Motor Mounting Nuts Using Standard Open End Wrench. Stainless Steel Casing. Polished Stainless Steel is Strong and Corrosion Resistant. Six Sided Shafts for Positive Impeller Drive: The Proprietary, Engineered Polymer Bearing Material is Strong and Resistant to Abrasion and Wear: The Enclosed Upper Bearing is Mounted in a Durable Noryl Bearing Spider for Excellent Abrasion Resistance. 36 Month from Date of Installation, 42 Month from Date of Manufacture Warranty.