153-0002 Zoeller N153 Dose-Mate High-Head Cast Iron Manual Effluent Pump 115V 10.5 Amps 1/2 HP 3450 RPM 1PH With 1-1/2" Discharge Size And 1-1/2" NPT Discharge End Connection And 20 Ft. Power Cord
Part #ZOE1530002
MFG #153-0002
Manufacturer Name : Zoeller
- Dewatering Effluent Pump
- Type Submersible
- Applicable Standard UL, CSA (Canada and US), SSPMA
- Discharge Size 1-1/2"
- End Connection Threaded Outlet
- Overall Dimensions 10-3/32" Length x 7-3/4" Width x 12-1/8" Height
- Float Type Piggyback Variable Level
- Flow Rate 72 GPM
- Discharge Head 44'
- Casing Material Powder Coated Epoxy Finished Cast Iron
- Shaft Material AISI 1215 Steel
- Housing Material Cast Iron
- Impeller Material Thermoplastic
- Impeller Design Non-Clogging Vortex
- Shaft Seal Details Carbon-Ceramic Face Mechanical Seal
- Solid Size 3/4"
- Power Cord Length 20'
- Power Rating 1/2 HP
- Input Supply Rating 115 Volt 60 Hertz 1 Phase 10.5 Amp
- Speed Rating 3450 RPM
- Temperature Rating 130 Deg F
- Motor Type Oil Filled Hermetically Sealed, Permanent Split Capacitor
- Options Pump Stand
- Inclusions/Features Non-Automatic Operation, Stainless Steel Lifting Handle, Bolts, Hardware, Upper Sleeve Bearing and Lower Ball Bearing Running in Bath of Oil, Neoprene Gasket, PVC Adapter Fitting, Automatic Reset Thermal Overload Protected
- Application Dewatering, Effluent System, Sump, Septic Tank, Enhanced Flow Step Systems
- Weight 37 Lb
- Install Instructions
Specification Sheet - The Sizing of Effluent Systems Normally Requires Variable Level Floats Controls and Properly Sized Basins to Achieve Required Pumping Cycles or Dosing Timers with Non Automatic Pumps