L4006H1004/U Honeywell High Limit Aquastat 100-240F
Part #HONL4006H1004
MFG #L4006H1004/U
Installation : Horizontal/Vertical
Manufacturer Name : Honeywell
Operating Temperature : 100 to 240 Deg F
- Temperature Controller
- Bulb Type Copper
- Voltage Rating 120 to 240 Volt AC
- Minimum AC Voltage Rating (V) 120 Volt
- Maximum AC Voltage Rating (V) 240 Volt
- Minimum DC Voltage Rating (V) 0.25 Volt
- Maximum DC Voltage Rating (V) 12 Volt
- Operating Temperature 100 to 240 Deg F
- Size 2" Width x 2-1/8" Depth x 5-5/8" Height
- Mounting Horizontal/Vertical/Strap-On
- Application Boiler, Storage Tank, Duct
- Approval UL, CSA, AGA
- Contact Rating 1.3 Amp at 240 Volt AC, 2.6 Amp at 120 Volt AC (Full Load), 7.8 Amp at 240 Volt AC, 15.6 Amp at 120 Volt AC (Locked Rotor), 0.25 Amp at 0.25 to 12 Volt DC
- Operating Pressure 255 PSI (Immersion Well), 200 PSI (Direct Immersion)
- Switching Action SPST
- Bulb Size 3/8" x 2-7/8"
- Capillary Length 1-1/2"
- Includes Strap-On Mounting Bracket, Heat Conductive Compound, Stop Factory Set at 240 Deg F
- Packaging Quantity 100
- Weight 1.2 Lb
- Install Instructions
Specification Sheet - Aquastat Controllers are Immersion Type Devices for Limiting or Regulating the Temperature of Liquids in Boilers, Storage Tanks and other Applications Where Temperature Control is Required; Honeywell's L4006 are Used in Applications that Utilize the Existing Well; L4006 Provide Spst Switching for High or Low Limit or Circulator Control; L4006 Models are Available for Insertion in Vertical or Horizontal Immersion Well, Vertical or Horizontal Direct Immersion and Surface Mounting; Totally Enclosed Micro Switch Snap-Acting Switches Operate on Temperature Rise to Set Point; Visible Control Point Scale and External Adjustment Screw Permit Easy Setting; Horizontal or Vertical Insertion of the Sensing Element; Direct or Well Immersion of the Sensing Element; Models Available for Strap-On Mounting; Remote Bulb Model may be Used to Sense Air Temperature in Ducts and in Outside Air Sensing Applications; Trade Line Models Include Heat-Conductive Compound; Select Models have Wells; Models Calibrated for High Limit use are also Suitable for Low Limit Control if a Separate High Limit Controller is Used