L6006A1145F/U Honeywell Horizontal Mount Aquastat 140-240F
Part #HONL6006A1145
MFG #L6006A1145/U
Installation : Horizontal
Manufacturer Name : Honeywell
Operating Temperature : 100 to 240 Deg F
- Temperature Controller
- Bulb Type Copper
- Voltage Rating 120 to 240 Volt AC
- Minimum AC Voltage Rating (V) 120 Volt
- Maximum AC Voltage Rating (V) 240 Volt
- Minimum DC Voltage Rating (V) 0.25 Volt
- Maximum DC Voltage Rating (V) 12 Volt
- Operating Temperature 100 to 240 Deg F
- Size 2" Width x 2-1/8" Depth x 5-5/8" Height
- Mounting Horizontal
- Application Boiler, Storage Tank, Duct, Circulator
- Approval UL, CSA, AGA
- Contact Rating 5.1 Amp at 240 Volt AC, 8 Amp at 120 Volt AC (Full Load)
- 30.6 Amp at 240 Volt AC, 48 Amp at 120 Volt AC (Locked Rotor), 0.25 Amp at 0.25 to 12 Volt DC
- Differential Temperature 5 to 30 Deg F Adjustable
- Operating Pressure 255 PSI (Immersion Well), 200 PSI (Direct Immersion)
- Switching Action SPDT
- Bulb Size 3/8" x 2-7/8"
- Capillary Length 3"
- Includes Heat Conductive Compound, Stop Factory Set at 240 Deg F
- Packaging Quantity 100
- Weight 1.2 Lb
- Install Instructions
MSDS Sheets
Specification Sheet - Aquastat Controllers are Immersion Type Devices for Limiting or Regulating the Temperature of Liquids in Boilers, Storage Tanks and other Applications Where Temperature Control is Required; Totally Enclosed Micro Switch Snap-Acting Switches Operate on Temperature Rise to Set Point; Visible Control Point Scale and External Adjustment Screw Permit Easy Setting; Horizontal or Vertical Insertion of the Sensing Element; Direct, Well Immersion or Surface Mounting of the Sensing Element Available; Remote Bulb Model may be Used to Sense Air Temperature in Ducts and in Outside Air Sensing Applications; Direct or Well Immersion Trade Line Models Include Heat-Conductive Compound; Select Models have Wells; L6006 Models are Available for Insertion in Vertical or Horizontal Immersion Well, Vertical or Horizontal Direct Immersion and Surface Mounting; Models Calibrated for High Limit use are also Suitable for Low Limit Control if a Separate High Limit Controller is Used