261 2-STAGE BOILER & SETPOINT CONTROL
Part #TEK261
MFG #261
Manufacturer Name : Tekmar
- Boiler Control
- Item Boiler Control
- Type Probe
- Applicable Standard UL 873, CSA C22.2, CSA (Canada and US)
- Actuation Type Automatic
- Switch Type DIP
- Overall Dimensions 7-9/16" Width x 2-13/16" Depth x 6-5/8" Height
- Input Supply Rating 1300 VA at 120 Volt AC 50/60 Hertz
- Temperature Rating 32 to 113 Deg F
- Inclusions/Features (1) Outdoor Sensor, (1) Universal Sensor
- Application Baseboard, Fan Coil, Dedicated Set Point Heating in Commercial Building
- Enclosure NEMA 1
- Enclosure Material Blue PVC Plastic
- Optional Device Timer 032
- Relay Rating 240 Volt AC, 10 Amp, 1/3 HP
- Humidity Rating Less than 90 Percent RH, Non-Condensing
- Warranty 3 Year Limited
- Install Instructions
Specification Sheet - Designed to Stage Two On/Off Boilers Using Outdoor Temperature Reset; This Control Regulates a Single Heating Water Temperature Through Outdoor Temperature Reset and Set Point Target Control; It is Capable of Controlling (Stage and Rotate) up to 2 On/Off Boilers or a Single Two Stage Boiler as Well as the System Pump; Operate Hydronic Heating Equipment with Outdoor Temperature Reset to Gain Energy Savings and Indoor Comfort; Setback Input for Energy Saving; Warm Weather Shut Down; Automatic Boiler Differential; Two Stage Boiler Control; Quick Setup for Easy Installation and Programming; User Comfort Adjustment to Increase or Decrease Building Space Temperature; Advanced Settings to Fine-Tune Building Requirements; Test Sequence to Ensure Proper Boiler Operation; Pump Exercising; Powered Boiler Pump Output; 3 Year Limited Warranty